Polyurethane floors are usually softer and more elastic, which makes them more resistant to scratching as their elasticity tends to absorb some of the impact. The elasticity of PU floors also makes them a preferred choice in freezing chambers where the storage temperature can reach -30 degrees Celsius (-22 F). They are also a good choice for multideck car-parks since the elastic coating can act as a waterproofing and crack-bridging layer.
Epoxies and polyurethanes behave differently when exposed to certain chemicals. For example polyurethanes are the preferred choice in food industries that have exposure to lactic acids. This the reason why many food processing companies that work in milk, dairy, cheese production choose polyurethanes.
Epoxies under such conditions may experience corrosion and yellowing. However when working in industries with sulfuric acids (like battery manufacturing etc) epoxy floors are much more resistant than polyurethanes. If you are working in a facility with heavy exposure to chemicals, check with the manufacturer to see which product is better suited.
Click here to view a table on the chemical resistance properties of epoxy
http://www.engineeringtoolbox.com/chemical-resistance-epoxy-d_786.html
Epoxy resins are also sensitive to moisture, but the damage done by humidity will be far more limited. Therefore when working in environments where the presence of humidity could be an issue, epoxy is always the much better choice.
Polyurethane floors can be easily modified to extend or limit their pot life, re-coat time as well as the total curing time. This flexibility enables contractors to complete PU floors in a much shorter space of time .With PU you could effectively start a multicoat project on Friday and hand it over on Monday. Epoxy floors are much less flexible in this respect in the sense that they usually require 7 days to fully cure.
In general polyurethanes are harder to work with. Their limited pot life and sensitivity to humidity require very well trained and experienced staff. Personally I refuse to supply inexperienced teams with PU floor resins. Too many things can go wrong.
Finally if you are wondering which one of the two resins is cheaper, I do not really have an answer to that. There are quite a few varieties of products out there. Comparing epoxies to PUs is like comparing apples to oranges. Ultimately your choice of floor should not be based on which one of the two is cheaper, but which one of the two suits your needs.
Source : http://learncoatings.com/wordpress/what-are-the-differences-between-epoxy-and-polyurethane-floors/
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.